BURNER MANAGEMENT SYSTEMS

ACL CSC400 Burner Management Systems/Combustion Safety Controller

The ACL CSC400 Combustion Safety Controller is a leading edge burner management system which provides burner ignition and flame fail sensing for single or dual burner applications. It monitors three separate thermocouple inputs that can be used for temperature control in process applications such as tanks, heater/treaters, fired separators, line heaters, re-boilers or any other applications where accurate temperature monitoring and or control is required. The CSC400 can be configured to be used on incinerators, enclosed combustors, and flare stacks as well. The CSC400 provides two 4-20mA inputs and outputs for shutdown, monitoring, and/or transmitter requirements, as well as Modbus for communication and control.

ACL 5500 Combustion Safety Controller

The ACL 5500 Combustion Safety Controller is designed to ignite and prove a continuous pilot and monitor and annunciate multiple heater shutdowns for all types of natural gas fired heaters and industrial sized burner applications. The ACL 5500 is a key component in a complete system that provides safe, reliable, high efficiency solutions which meets and exceeds CSA B149.3-15 and NFPA Standards.

ACL CSC 200 Burner Management Systems/Combustion Safety Controller

The ACL CSC 200 Combustion Safety Controller is a simple to use Burner Management System/Combustion Safety Controller that has an abundance of features with no programming requirements needed. The ACL CSC200 provides burner ignition and flame fail sensing, shutdown monitoring of multiple inputs, as well as monitoring of two separate thermocouple inputs which can be utilized for temperature control in process applications such as tanks, heater/treaters, fired separators, line-heaters, re-boilers or any other application where accurate temperature monitoring or control is required. The system is designed to operate with or without a continuous pilot. The ACL CSC200 has Modbus communication capabilities. The ACL CSC 200 meets and exceeds Canadian B149.3-15 CSA Standards US NFPA86 Guidelines.

ACL 5100 Combustion Safety Controller

The ACL 5100 Combustion Safety Controller is designed to ignite and prove a continuous pilot and monitor and annunciate shutdowns for all types of natural gas fired heaters and industrial sized burner applications. The ACL 5100 is a key component in a complete system that provides safe, reliable, high efficiency solutions which meet and exceed CSA B149.3-15 and NFPA Standards.

ACL CSC400-FD Forced Draft Burner Management System/Combustion Safety Controller

The ACL Forced Draft CSC400-FD Combustion Safety Controller is a leading edge burner management system which provides burner ignition and air/fuel ratio control for forced draft burner applications. It monitors three separate thermocouple inputs that can be used for temperature control in process applications such as tanks, heater/treaters, fired separators, line heaters, re-boilers or any other applications where accurate temperature monitoring and/or control is required. The CSC400-FD can be configured to be used on forced draft incinerators, combustors, and air-assisted flare stacks as well. The CSC400-FD provides control for fuel and air ratios for fine tuning. Modbus communications for measurement and control is provided as standard.

CONTACT US

Canadian and International Sales and Distribution
Postal Address:
Box 2002, 805 Main Ave. West,
Sundre, Alberta, Canada
T0M1X0
Toll-Free: 1-877-638-5234
Phone: 1-403-638-5234
Fax: 1-403-638-4973
USA Sales and Distribution
Mailing Address:

P.O. Box 7528

Oklahoma City, OK

73153

Physical Address:

228 S.E. 8th Street

Moore, OK 

73160

Phone: 1-405-703-2745
Ron Truelove
Vice President of U.S. Operations
ACL Combustion Inc.
Phone: 405.203.3557
SEND AN INQUIRY

FOLLOW US

  • White LinkedIn Icon
  • White Facebook Icon